DG-IR-3C Infrared Detector
0
Applications:
- a protection system element to be installed in ducts and pipelines connected to bucket conveyors, filters, tanks and other equipment for immediate detection of explosion events,
- identification of ignition sources such as flame, heat and sparks in order to activate the protection system on process lines and ducts connected to protected equipment,
- quick detection of an explosion propagating through ducts and piping in order to activate the protection system,
- to be used in enclosed areas without daylight access.
EX 100.1 Single-Zone Control Unit
0
Applications:
- control unit for an explosion protection system (HRD containers, pressure and infra-red detectors),
- this single-zone control unit performs the following control and diagnostic functions: system monitoring, distribution of stored energy for actuation of explosion-protection equipment and on-line verification of the status of an explosion suppression system.
EX 8000 / EX 5000 Multi-Zone Control Unit
0
Applications:
- control unit for an explosion protection system (HRD containers, pressure and infra-red detectors),
- this multi-zone control unit performs the following control and diagnostic functions: system monitoring, distribution of stored energy for actuation of explosion-protection equipment and on-line verification of the status of an explosion suppression system,
- its modular design allows selective system activation (e.g. system activation for a single piece of equipment in which an explosion occured).
ExKop Explosion Isolation and Venting System
0
Applications:
- protection of filters, mixers, cyclones, mills, dryers and other process equipment as well as preventing the transfer of explosion effects to the rest of the plant area or equipment.
Explosion Isolating Rotary Valve
0
Applications:
- certified for application in explosion hazard areas,
- the valve can be mounted on the outlet of filters, cyclones, silos, conveyors and other process equipment,
- suitable for dosing and direct installation in a pneumatic conveying system.
Explosion Venting On Ducts and Pipelines – STT Type Diverter
0
Applications:
- protection against propagation of explosion from processing equipment (e.g. mills) to silos, filters or electrostatic precipitators by controlled venting of explosion effects to the atmosphere (explosion isolation) and/or,
- protection against explosion propagation from silos, filters or electrostatic precipitators to the plant’s process equipment by controlled venting of explosion effects (explosion isolation).
HRD-E Suppressant Containers
0
Applications:
- protection of silos, filters, cyclones, mixers, dryers, granulators, etc., where flammable materials are present in explosive concentrations,
- HRD cylinders are used across every industry for the protection of any tanks, ducts and pipelines in which ST1-ST3 class dusts, gases or hybrid mixtures are present.
HRD-E, HRD Piston Fire and HRD Firewolf Suppressant Containers
0
Applications:
- protection of silos, filters, cyclones, mixers, dryers, granulators, etc., where flammable materials are present in explosive concentrations,
- HRD cylinders are used across every industry for the protection of any tanks, ducts and pipelines in which ST1-ST3 class dusts, gases or hybrid mixtures are present.
IR-13 Infrared Detector
0
Applications:
- a protection system element to be installed in ducts and pipelines connected to bucket conveyors, filters, tanks and other equipment for immediate detection of explosion events for explosion suppression systems,
- identification of ignition sources such as flame, heat and sparks in order to activate the protection system on process lines and ducts connected to protected equipment,
- quick detection of an explosion propagating through ducts and piping in order to activate the protection system,
- to be used in enclosed areas without daylight access.
MEX-3.2 Explosion Multisensor
0
Applications:
- an element of the protection system for vessels and process equipment where flammable and combustible substances are handled in explosive concentrations,
- identification of explosion pressure rise, in its early stages, triggers the activation of the explosion protection system,
- designed for assembly on process vessels, ducts and pipelines in which ST1-ST3 class dusts are present as well as for gases and hybrid mixtures across all industries.
Particulate Emission Monitors
0
Applications:
- supports explosion suppression
- detection of damaged filtration media,
- monitoring for excessive concentrations of flammable dust in clean air ducts.
Q-BOX Flame-reduced Venting System
0
Applications:
- flameless explosion venting (safe for nearby equipment and personnel),
- protection of indoor/outdoor process equipment in areas where personnel may be present,
- silos, filters, etc.
Q-Flap Non-Return Explosion Valve (self-monitoring capability available as an option)
0
Applications:
-
grinding plants, wood processing, paint manufacturers,
-
chemical and pharmaceutical,
-
processes: drying, granulation, grinding, dust extraction.
Q-ROHR-3 Flameless Venting System
0
Applications:
- flameless explosion venting (safe for nearby equipment and personnel),
- protection of indoor/outdoor process equipment in areas where personnel may be present,
- silos, filters, etc.,
- suitable for sterile applications.
RLE-S Rectangular Air Cushion Explosion Door
0
Applications:
- protection of filters, electrostatic precipitators and dryers from explosion damage through the controlled venting of explosion effects to the atmosphere,
- automatic closing of the door once the explosion pressure has been relieved (air shut off).
SK and BIRD Burst Indicators
0
Applications:
- detection of relief discs/panels being actuated,
- suitable for installation in explosion hazard zone 0 (provided that monitoring systems and limit switches are used).
Speed WEY HSI Slide Valve
0
Applications:
- protection of mills, silos, filters, separators, driers, mixers, etc.; suitable for process treatment of flammable and explosive dusts (ST1 and ST2 class) and hybrid mixtures,
- suitable for installation on ducts connected to equipment whose construction ensures resistance to the pressure of explosion and places where reduced pressure of explosion may cause damage,
- the slide valve can be used in systems in the permanent presence of dust.
TT-Uni-K Circular Air Cushion Explosion Door
0
Applications:
- protection of containers and silos from damage due to explosion through controlled venting of explosions to the atmosphere,
- automatic closing of the door once the explosion pressure has been relieved (air shut off).
VENTEX ESI-E /-D /-C Isolation Valves
0
Applications:
- protection of mills, filters, separators, driers, cyclic granulators, etc. Used in the process treatment of ST1 and ST2 class dusts, gases and hybrid mixtures,
- for installation on ducts connected to equipment whose construction ensures resistance to the pressure of explosion and places where reduced pressure of explosion may cause damage to the enclosed parts of equipment,
- suitable for installation in pipework carrying gases with low dust concentrations (e.g. after filters, before and after a batch drier).
W-DS Pressure Sluices
0
Applications:
- A double butterfly valve and a chamber system for difference-free feeding or exhaust of bulk materials to or from high or low pressure areas. Also suitable for abrasive materials. Maximum differential pressure up to 10 bar.
Earth-Rite RTR — Static Grounding Protection for Tanker Trucks
0
Applications:
- static grounding protection for tanker trucks,
- static grounding protection for tanks, drums and big-bugs (provided that the mode selector keyswitch is in place).
Earth-Rite Plus – Static Ground Indicator and Interlock System for Rail Tankers, Drums, IBC’s, etc.
0
Earth-Rite Plus – Static Ground Indicator and Interlock System for Rail Tankers, Drums, IBC’s, etc.
0
Applications:
- verification of a static ground connection on a wide range of industrial plant, including drums, IBC’s, containers, rail tankers and other conductive equipment.
Earth-Rite FIBC Static Grounding for Type C FIBC Bags
0
Applications:
- monitoring the resistance of Type C FIBC bags ensuring that the conductive elements of the bag are capable of dissipating static charges in compliance with Cenelec CLC/TR: 50404.
Earth-Rite Multipoint Static Grounding System
0
Applications:
- One Earth-Rite Multipoint unit can monitor up to 8 potentially isolated conductive components on processing machinery engaged in powder processing operations within zoned or classified areas,
- Applications with items of process plant incorporating sections, which must be removed periodically for cleaning, product discharge or other purposes (whose removable parts may become isolated conductors), including systems for dust control, grinding, diminution, powder handling, emptying/filling of silos and tanks, and driers.
Earth-Rite Omega Earth Monitoring System for Mobile and Fixed Equipment
0
Applications:
- the Earth-Rite OMEGA system enables engineers, contractors and OEMs to incorporate dedicated static earth monitoring as part of larger plant instrumentation and control systems,
- the Earth-Rite Omega module is designed for rail mounting (35 mm, DIN standard) into control panels. The system is capable of checking resistance between two points and providing relay output switching at a user-defined set point,
- typical applications include temporary ground condition monitoring of all mobile conductive plant items and permanent continuity monitoring of fixed plant items in all flammable atmosphere zones, as well as monitoring simple devices such as float switches in hazardous areas.
Sole-Mate Anti-Static Footwear Test Station
0
Applications:
Sole-Mate is an easy-to-use device designed to check the condition of static-dissipative (anti-static) footwear prior to entering a safety critical hazardous area (potentially explosive atmosphere). The Sole-Mate mat tests continuity from the operative’s finger to the floor plate right through the static dissipative footwear. The unit is installed at the entrance to a hazardous area – it will provide a “pass” or “fail” signal depending on whether or not the resistance falls within the pre-set limits. The Sole-Mate is set to measure resistance according to the EN345 standard (lower and upper limit), but alternative ranges are also available.
- Designed for use with static dissipative industrial safety footwear,
- Also suitable for use with static dissipative gloves,
- Calibrated to NAMAS standards,
- High visibility indicators and shrill “fail” audible alarm,
- Simple to install and operate,
- Strong and durable design.
Bond-Rite Self Testing Static Grounding Clamps with Visual Indication
0
Applications:
- for bonding/earthing of portable/mobile plant equipment (drums, containers, FIBCs, tankers, etc.),
- plant items usually have a built-up of additional insulating layers, such as paints, resins, adhesives and other substances inherent to the processing environment, which creates a challenge to standard earthing clamps and may result in the clamp appearing to be physically attached, but not actually performing its intended function (safe static dissipation),
- the Bond-Rite clamps are in compliance with stringent safety standards and are suitable for use within ATEX zones.
Static discharge reels
0
Applications:
Cenelectrex static discharge reels are available in many size/length options, have a self retracting cable drum and instant lock mechanism to prevent cable becoming tangled. They are usually fitted with a Cling-On Clamp, but alternative clamps are also available, including Bond-Rite.
Stainless Steel Heavy Duty Clamp With Hytrel Spiral Cable
0
Applications:
304 stainless steel heavy duty clamp is designed for earthing many types of containers, drums / barrels, kegs, open vessels, IBC’s and mobile tankers. The clamp has twin tungsten carbide teeth to provide a reliable connection. Ideal for clean room applications or areas where high corrosion resistance is required.
Stainless Steel Medium Duty Clamp with Hytrel Spiral Cable
0
Applications:
Medium duty clamp with two stainless steel contacts, suited to lighter applications such as earthing and bonding of small containers, carboys and vessels. Available in carbon steel or stainless steel construction.
Special purpose grounding clamps
0
Applications:
- FIBC clamp
Specially designed to provide a positive connection to type C big bags or static dissipative liners, without damaging their material. - C type clamps
Three sizes of “C” clamps are available for semi-permanent bonding to drums on storage/filling racks or where a “screw-tight” connection is required. - Aircraft clamps
The ALS-lOA Static bonding clamp has special plated steel jaws designed for attaching to aircraft grounding posts or landing gear, and is made to US military specifications: NSN#5999-00-134-5844 and MIL M83413/7-1. - Pipe clamps
Available in a range of nominal sizes from DN 15 to DN 150 providing a semi-permanent ground connection for bonding items to earthed conductive pipes. - Screwdown clamp
Heavy duty clamp for earthing barges, vessels or rail cars, or wherever a positive screw down clamping action is required.
Grounding and Bonding Cables in Hytrel Casing
0
Applications:
Designed to combine low electrical resistance with high mechanical strength, special grounding and bonding cables are available in a range of length from 1 to 15 meters. A hytrel chemical and abrasion resistant covering enables the cables to be used in many types of industries/applications. Cables are available in spiral extendable form or straight lengths, and colour coded green for European standards or orange for North America. The client may choose from a wide range of specialist products to obtain an optimal combination of clamps and cables for a particular application. All items can be purchased separately for self-assembly or supplied as fitted and tested assemblies.
